Solar Charger History
SmartSolar MPPT 100/50 (SN HQ2318TCFN7, FW 164) | Last reading: 2026-11-19 12:16:01 | Power: 1 W | SOC: 100% | State: Float
← Back to Dashboard
State of charge is estimated, not measured: 100% when the charger
reaches Absorption or Float, then counting the amp-hours the charger puts in against a standing
drain of 0.5 A (400 Ah bank). With the charger off, a low battery voltage caps it. Loads larger
than the standing drain show up only through that voltage cap, so with loads connected it can
read high until the next night.
Peak power per day shows what the array can deliver only on
days the charger was still in Bulk at midday - once the battery is full (Absorption/Float) the charger
takes just what it needs, so those days read low.